WAG 9 QUIZ 1

1. Normal position of 152 is

2. In WAG9 loco if the Loco Status is showing “01 “it indicates

3. If LSFI lamp continue glow than it means

4. Switches to release Loco brake

5. In WAG9 loco, Constant Speed Control (CSC) can be activated at any speed above....... कांस्टेंट स्पीड कितने स्पीड होने पर एक्टिवेट होगी

6. In solenoid 30 if left side plunger is pressed than parking brake_______

7. VCU रिसेट करने के लिए NODE होना चाहिए

8. In CGL make locos if ALG 1 showing 311F means _____TM ISOLATED

9. Maximum breaking effort in WAG 9 locomotive is

10. Contacter for MCPA in Wag 9 loco (बेबी कंप्रेसर का कांटेक्टर )

11. If A9 screen is showing fault code no 14 it means

12. Speedometer transmitter is provided on the wheel no ---------------------------------- in WAG9 Loco स्पीडोमीटर ट्रांसमीटर कौन से व्हील में लगाया गया है

13. In DPWCS loco Password for LOTUS make unit is

14. In WAG9 loco location of AIR DRYER unit is

15. In knorrs loco bell ring is available in

16. In ARC make DPWCS unit password is

17. If both FDU sensers detech smoke than priority____ fault came

18. Torque arm is available in ________ loco

19. If Auxiliary con 2 is isolated followed by aux. Converter 1 than what happened (ऑक्स कनवर्टर 1 के बाद ऑक्स कनवर्टर 2 होने से क्या होगा )

20. If Battery voltage showing 0 volt than LP will check MCB No (बैटरी वोल्टेज 0 दिखने पर कौन सी MCB चेक करेंगे )

21. In WAG 9 locomotive if speed raises_________kmph of Rated loco speed than buzzer sounds

22. If any sub system is isolated with P1 fault msg, LP Will get indication_____ (P1 मेसेज के साथ कोई सब सिस्टम आइसोलेट हो तो )

23. If Modified locos where MRB is three phase it works on only in ___ mode

24. In BT propulsion loco if DCU2/ALG2 showing 43302 means ____TM is isolated

25. Over current relay for WAG 9 is and its location