WAG 9 QUIZ 2

1. If loco break cyclinder gauge showing pressure more than 0.6kg/cm2 than speed not raised above____ kmph

2. Position of mode switch in MU LOCO REAR cab

3. Loco Grounding key is_______

4. MCB for Traction BOgie 1 is

5. MCB for CP 1 is

6. Before asking relief in 3 phase loco LP Should (3 फेज लोको में रिलीफ लोको डिमांड करने से पहले क्या करेंगे )

7. P1 fault MSG came if Battery voltage is_____ volts

8. 127.22/2 is used to isolte

9. MVR 86 acts in _______ mode

10. LSFI glow means

11. in WAG 9 Contacter no 218 is related to

12. VCB is open and panto raised than CE will be off next ___ min

13. During loco brake testing in WAG9 loco should not move below _____KN

14. In WAG 9 locomotive_____ loco cock 70/74/47/136 are closed

15. To isolate panto 1 PSS 85 put on _____position

16. switch 160 limits loco speed within ____kmph

17. In every WAG 9 loco TM isolation is possible

18. IF working loco is WAG 7 and a dead loco to be attached in rear is WAG9 than, LP/LPS will make WAG9 ____ DEAD ( WAG 9 लोको को डेड करके WAG 7लोको के पीछे जोड़ना है तो क्या कहलायेगा )

19. SS 06 is realated to _________

20. In DPWCS connected E-70 slave loco, position of A9 is

21. In DPWCS connected E-70 loco position of A9 in LEAD loco

22. Auto break valve in knorrs loco is lock and unlock in _____position

23. Contacter no 126 and 218 is mainly related to

24. Max. breaking effort in WAG 9 locomotive is ______KN

25. If parking brake is applied than parking brake gauge pressure will be