Loco Quiz 8

1. Deenergising value of QCVAR {ac} is

2. QRS relay energise when 1. Unlock BL 2. CCLS Good 3. Q 51 Denergise 4. RGEB2 INTERLOCK Close

3. When CAB 2 MPJ is forward than position of J1/J2 Will be A. J1UP B.J2UP C. J1DN D. J2DN

4. C118 N.C.I. provided on Q100 branch is having with the time lag of 5 secods due to

5. If any sub system is isolated with P1 fault msg, LP Will get indication_____ (P1 मेसेज के साथ कोई सब सिस्टम आइसोलेट हो तो )

6. If panto touches the contact wire and ZPT on “1”and BLDJ becomes defective then Loco pilot will get -

7. Diffrence beetween NO LOAD and load battery voltage should be not more than

8. Speedometer transmitter is provided on the wheel no ---------------------------------- in WAG9 Loco स्पीडोमीटर ट्रांसमीटर कौन से व्हील में लगाया गया है

9. If both FDU sensers detech smoke than priority____ fault came

10. Loco Grounding key is_______

11. In knorrs loco bell ring is available in

12. If QCON relay is energise it will give signal to LP by__________extinguise

13. Full form of EEC is

14. DC to DC converter gives output of _________volts

15. If A9 screen is showing fault code no 14 it means

16. Contacter no 126 and 218 is mainly related to

17. If CURRENT diffrence in TM 1 and TM 2 is more than 150A Than

18. IF rear cab BL in STUCKED in Unlocked position than ______ fault happen

19. In STC loco Q118 branch if NCI Of C106/107/105 Is faulty than LP will get trouble in________

20. continues Current rating for WAP 4 Locomotive